Link to TYHJ
This article is about the chemical element. For other uses, see Krypton (disambiguation)
Krypton (from Ancient Greek: κρυπτός, romanized: kryptos 'the hidden one') is a chemical element; it has symbol Kr and atomic number 36. It is a colorless, odorless noble gas that occurs in trace amounts in the atmosphere and is often used with other rare gases in fluorescent lamps. Krypton is chemically inert.
Krypton, like the other noble gases, is used in lighting and photography. Krypton light has many spectral lines, and krypton plasma is useful in bright, high-powered gas lasers (krypton ion and excimer lasers), each of which resonates and amplifies a single spectral line. Krypton fluoride also makes a useful laser medium. From to , the official definition of the metre was based on the wavelength of one spectral line of krypton-86, because of the high power and relative ease of operation of krypton discharge tubes.
Krypton was discovered in Britain in by William Ramsay, a Scottish chemist, and Morris Travers, an English chemist, in residue left from evaporating nearly all components of liquid air. Neon was discovered by a similar procedure by the same workers just a few weeks later.[12] William Ramsay was awarded the Nobel Prize in Chemistry for discovery of a series of noble gases, including krypton.[13]
In , the International Bureau of Weights and Measures defined the meter as 1,650,763.73 wavelengths of light emitted in the vacuum corresponding to the transition between the 2p10 and 5d5 levels in the isotope krypton-86.[14][15] This agreement replaced the international prototype meter, which was a metal bar located in Sèvres. This also made obsolete the definition of the ångström based on the red cadmium spectral line,[16] replacing it with 1 Å = 10'10 m. The krypton-86 definition lasted until the October conference, which redefined the meter as the distance that light travels in vacuum during 1/299,792,458 s.[17][18][19]
Krypton is characterized by several sharp emission lines (spectral signatures) the strongest being green and yellow.[20] Krypton is one of the products of uranium fission.[21] Solid krypton is white and has a face-centered cubic crystal structure, which is a common property of all noble gases (except helium, which has a hexagonal close-packed crystal structure).[22]
Naturally occurring krypton in Earth's atmosphere is composed of five stable isotopes, plus one isotope (78Kr) with such a long half-life (9.2× years) that it can be considered stable. (This isotope has the third-longest known half-life among all isotopes for which decay has been observed; it undergoes double electron capture to 78Se).[11][23] In addition, about thirty unstable isotopes and isomers are known.[24] Traces of 81Kr, a cosmogenic nuclide produced by the cosmic ray irradiation of 80Kr, also occur in nature: this isotope is radioactive with a half-life of 230,000 years. Krypton is highly volatile and does not stay in solution in near-surface water, but 81Kr has been used for dating old (50,000'800,000 years) groundwater.[25]
85Kr is an inert radioactive noble gas with a half-life of 10.76 years. It is produced by the fission of uranium and plutonium, such as in nuclear bomb testing and nuclear reactors. 85Kr is released during the reprocessing of fuel rods from nuclear reactors. Concentrations at the North Pole are 30% higher than at the South Pole due to convective mixing.[26]
Like the other noble gases, krypton is chemically highly unreactive. The rather restricted chemistry of krypton in the +2 oxidation state parallels that of the neighboring element bromine in the +1 oxidation state; due to the scandide contraction it is difficult to oxidize the 4p elements to their group oxidation states. Until the s no noble gas compounds had been synthesized.[27]
Following the first successful synthesis of xenon compounds in , synthesis of krypton difluoride (KrF
2) was reported in . In the same year, KrF
4 was reported by Grosse, et al.,[28] but was subsequently shown to be a mistaken identification.[29] Under extreme conditions, krypton reacts with fluorine to form KrF2 according to the following equation:
Kr + F 2 ' KrF 2 {\displaystyle {\ce {Kr + F2 -> KrF2}}}
Krypton gas in a krypton fluoride laser absorbs energy from a source, causing the krypton to react with fluorine gas, producing the exciplex krypton fluoride, a temporary complex in an excited energy state:[30]
2 Kr + F 2 ' 2 KrF {\displaystyle {\ce {2Kr + F2 -> 2KrF}}}
The complex can undergo spontaneous or stimulated emission, reducing its energy state to a metastable, but highly repulsive ground state. The ground state complex quickly dissociates into unbound atoms:
2 KrF ' 2 Kr + F 2 {\displaystyle {\ce {2KrF -> 2Kr + F2}}}
The result is an exciplex laser which radiates energy at 248 nm, near the ultraviolet portion of the spectrum, corresponding with the energy difference between the ground state and the excited state of the complex.[31]
Structure of Kr(H2)4. Krypton octahedra (green) are surrounded by randomly oriented hydrogen molecules.[
32]
Compounds with krypton bonded to atoms other than fluorine have also been discovered. There are also unverified reports of a barium salt of a krypton oxoacid.[33] ArKr+ and KrH+ polyatomic ions have been investigated and there is evidence for KrXe or KrXe+.[34]
The reaction of KrF
2 with B(OTeF
5)
3 produces an unstable compound, Kr(OTeF
5)
2, that contains a krypton-oxygen bond. A krypton-nitrogen bond is found in the cation [HC'N'Kr'F]+
, produced by the reaction of KrF
2 with [HC'NH]+
[AsF'
6] below '50 °C.[35][36] HKrCN and HKrC'CH (krypton hydride-cyanide and hydrokryptoacetylene) were reported to be stable up to 40 K.[27]
Krypton hydride (Kr(H2)4) crystals can be grown at pressures above 5 GPa. They have a face-centered cubic structure where krypton octahedra are surrounded by randomly oriented hydrogen molecules.[32]
Earth has retained all of the noble gases that were present at its formation except helium. Krypton's concentration in the atmosphere is about 1 ppm. It can be extracted from liquid air by fractional distillation.[37] The amount of krypton in space is uncertain, because measurement is derived from meteoric activity and solar winds. The first measurements suggest an abundance of krypton in space.[38]
For more Krypton, Kr Rare Gasinformation, please contact us. We will provide professional answers.
Krypton's multiple emission lines make ionized krypton gas discharges appear whitish, which in turn makes krypton-based bulbs useful in photography as a white light source. Krypton is used in some photographic flashes for high speed photography. Krypton gas is also combined with mercury to make luminous signs that glow with a bright greenish-blue light.[39]
Krypton is mixed with argon in energy efficient fluorescent lamps, reducing the power consumption, but also reducing the light output and raising the cost.[40] Krypton costs about 100 times as much as argon. Krypton (along with xenon) is also used to fill incandescent lamps to reduce filament evaporation and allow higher operating temperatures.[41]
Krypton's white discharge is sometimes used as an artistic effect in gas discharge "neon" tubes. Krypton produces much higher light power than neon in the red spectral line region, and for this reason, red lasers for high-power laser light-shows are often krypton lasers with mirrors that select the red spectral line for laser amplification and emission, rather than the more familiar helium-neon variety, which could not achieve the same multi-watt outputs.[42]
The krypton fluoride laser is important in nuclear fusion energy research in confinement experiments. The laser has high beam uniformity, short wavelength, and the spot size can be varied to track an imploding pellet.[43]
In experimental particle physics, liquid krypton is used to construct quasi-homogeneous electromagnetic calorimeters. A notable example is the calorimeter of the NA48 experiment at CERN containing about 27 tonnes of liquid krypton. This usage is rare, since liquid argon is less expensive. The advantage of krypton is a smaller Molière radius of 4.7 cm, which provides excellent spatial resolution with little overlapping. The other parameters relevant for calorimetry are: radiation length of X0=4.7 cm, and density of 2.4 g/cm3.
Krypton-83 has application in magnetic resonance imaging (MRI) for imaging airways. In particular, it enables the radiologist to distinguish between hydrophobic and hydrophilic surfaces containing an airway.[44]
Although xenon has potential for use in computed tomography (CT) to assess regional ventilation, its anesthetic properties limit its fraction in the breathing gas to 35%. A breathing mixture of 30% xenon and 30% krypton is comparable in effectiveness for CT to a 40% xenon fraction, while avoiding the unwanted effects of a high partial pressure of xenon gas.[45] The metastable isotope krypton-81m is used in nuclear medicine for lung ventilation/perfusion scans, where it is inhaled and imaged with a gamma camera.[46] Krypton-85 in the atmosphere has been used to detect clandestine nuclear fuel reprocessing facilities in North Korea[47] and Pakistan.[48] Those facilities were detected in the early s and were believed to be producing weapons-grade plutonium. Krypton-85 is a medium lived fission product and thus escapes from spent fuel when the cladding is removed.[49]
Krypton is used occasionally as an insulating gas between window panes.[50] SpaceX Starlink uses krypton as a propellant for their electric propulsion system.[51]
Krypton is considered to be a non-toxic asphyxiant.[52] Being lipophilic, krypton has a significant anaesthetic effect (although the mechanism of this phenomenon is still not fully clear,[53] there is good evidence that the two properties are mechanistically related), with narcotic potency seven times greater than air, and breathing an atmosphere of 50% krypton and 50% natural air (as might happen in the locality of a leak) causes narcosis in humans similar to breathing air at four times atmospheric pressure. This is comparable to scuba diving at a depth of 30 m (100 ft) and could affect anyone breathing it.
Krypton at Wikipedia'sat Wikipedia's
sister projects
Xenon is used for etching and deposition of microchips in semiconductor manufacturing, both as an atmosphere, plasma and as an ion beam source for etching and deposition processes. Xenon used in this process needs to be very pure as any impurities will end up contaminating the silicon substrate or reacting with the process chemicals like fluorine to produce poisonous and highly corrosive hydrogen fluoride (HF). As a global leader in servicing the electronics industry, Air Products' xenon is produced in our state-of-the-art electronics grade plant for better quality assurance. It can be used in excimer laser, laser buffer gases, etching of DRAM and 3D NAND and plasma display panels.
For more information, please visit Rare Gas Neon supplier.