Hydroxyethyl cellulose (known as HEC) is a white or light yellow, odorless, non-toxic fibrous or powdered nonionic, manufactured through etherification of alkali cellulose and ethylene oxide (or chlorohydrin). HEC is soluble in both cold and hot water, and has no gel characteristics. It has a wide range of substitution, solubility and viscosity, good heat stability (below 140 ° C), and no precipitation under acidic conditions. HEC solution can form transparent film. It has non-ionic characteristics which are not compatible with positive and negative ions and good compatibility. So it can be used as coating agent, binder, cement and gypsum auxiliary, thickener, suspending agent and medicine, excipients, antifogging agents, oil well fracturing fluids, drilling treatment agents, fiber and paper sizing agents, cosmetics, toothpaste, etc. It plays an important role in the development of the social economy and is one of the fastest growing cellulose ethers in recent years.
Contact us to discuss your requirements of hydroxyethyl cellulose hec. Our experienced sales team can help you identify the options that best suit your needs.
After the end of HEC etherification, refining is required. The refining process includes neutralization, cross-linking, washing, filtration and drying. The neutralization agent is usually an organic acid such as one or more of acetic acid, propionic acid, and formic acid.
When neutralized with an organic acid such as acetic acid, propionic acid or formic acid, the following disadvantages are obtained:
1. the material after the neutralization has a swelling phenomenon, and the appearance is thick, the material has a certain viscosity, which will block the filter cloth;
2. the water content of the material is large, reaching about 65-80%, and when the filter cake is formed by centrifuge or filter press, it will be squeezed too densely and strictly because the material has a certain degree of swelling. When the washing liquid continuously enters the filter cake to wash, the pressure of washing liquid reaches the highest pressure that the filter press can withstand. Therefore, the flow rate of the washing liquid is small, and the operation flexibility of the device is small;
3. Because the molecular weight of the organic acid is large, the solubility of the formed sodium salt in the washing solvent is low, and the ash content of the product cannot be reduced to less than 5% after washing. So the moisture content of the material is high when enter dryer, which might needs wash and dry again.
4. After drying, the material is relatively hard and coarse due to twice washing and drying. During the pulverization process, the pulverization load is large, and the temperature at the top of the pulverizer reaches 80 °C and 120 °C, which reduces the pulverizing ability.
In summary, the current use of organic acid as a neutralizing agent leads to complicated subsequent processing, high production cost, and low quality of the obtained hydroxyethyl cellulose refined product.
The other neutralization agent commonly used is mineral acid with concentration of 15-90%, which can effectively remove the alkaline substance in the slurry of crude hydroxyethyl cellulose. The concentration inorganic acid is preferably at 35-50% and 40-50% is the best. The inorganic acid is at least one or several kinds of sulfuric acid, phosphoric acid, nitric acid, or hydrochloric acid. When the material is neutralized by inorganic acid, the following advantages are obtained:
1. The appearance of the material after the neutralization is in the form of sand, suspended in the solvent after the etherification reaction, thus can be continuously washed by the drum type continuous filter press washing device. The materials are uniformly distributed on the filter net, washed under a certain pressure with an aqueous organic solvent, washing and separating simultaneously. Moreover, the washing pressure of each section is not high when washing, which is favorable for the flexibility of the filter press.
2. Inorganic acid is cheaper than organic acid, easier to buy from the market, and has a stable source and quality assurance.
3. After the inorganic acid neutralized material is washed, dried and pulverized, the appearance of the product has high whiteness and dispersibility, and the product stability is relatively good. In addition, the continuous production line greatly improves the production efficiency, reduces the labor intensity of workers, improves the intrinsic safety of the production line, and reduces the consumption of energy and raw materials.
Shandong ETON New Material Co., Ltd is specialized in cellulose ether production, sales and export trade as one of the manufacturer . Our company can produce tons every year for Hydroxy Propyl Methyl Cellulose(HPMC), Hydroxyethyl Methyl Cellulose (HEMC), Hydroxy Ethyl Cellulose (HEC), Hydroxy Propyl Starch Ether(HPS) etc .As one of the world top-level supplier for cellulose ether ,our products can be widely used in Food, pharmaceutical, paint ,dry-mixed mortar ,ceramics, oil-drilling ,daily-use chemical etc.
If you want to learn more, please visit our website What Is HPMC Made From.
/Wechat/: +
(HEC) is a remarkably efficient gelling agent and is useful for adding viscosity to a wide range of skincare products.it is stable across a wide pH range &#; typically between 3 and 10 though some loss of viscosity can occur below pH 3 and above pH 10 which may require increasing the amount of HEC slightly to compensate.
Add Hydroxyethyl Cellulose at 0.3% 0.4% to your heated water phase before combining with the oil phase to increase the viscosity of your emulsions and to aid the stability of the emulsion. According to the manufacturer of this product, HEC is a co-emulsifier so certainly will strengthen the stability of your emulsion.
HEC creates crystal clear gels with good suspension properties so can be used as the base for serums (works well with pretty much every water soluble active ingredient &#; including the sometimes difficult to work with aloe vera, alpha hydroxy acids etc). HEC gels can be used as the basis for salt and sugar scrubs (keep below 20% salt crystals (it may be necessary to increase the concentration of HEC).
Try 1% HEC for a pourable serum or scrub base or use 1.5% HEC for a thicker, more typical, gel
HEC is the ideal gelling agent for sterilising gels as it can readily support up to 60% alcohol and ought to be able to support 70% alcohol (though 60% alcohol is more than sufficient for hand sanitisers so an extra 10% might be regarded as superfluous)
Recipe and Method
Combine room temperature water and propanediol and then sprinkle the HEC into the liquid under the action of a stick blender. Leave to stand for 10 to 15 minutes. Then add the alcohol.
If you wish we have left a little space in the formulation for the addition of an appropriate fragrance such as tea-tree or eucalyptus oil. The gel will thicken further after 15 minutes or so after which it can be bottled. There is no need for any kind of preservative as alcohol at 20% or above more than adequately preserves the gel
The company is the world’s best mortar additives supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.