When wall putty powder and water, on the wall, is a chemical reaction, because of the generation of new substances, the wall putty powder down from the wall, ground into powder, and then use, not workable, because it has formed a new substance (calcium carbonate) during this period.The main components of grey calcium powder are:Ca(OH)2, CaO and a small amount of CaCO3 mixture.CaO+H2O=Ca(OH)2 - Ca(OH)2+CO2=CaCO3'+H2O gray calcium in water and air under the action of CO2, the formation of calcium carbonate, and HPMC only water, auxiliary gray calcium better reaction, its own did not participate in any reaction.
Please visit our website for more information on this topic.
Wall putty is a very common construction product in our daily life. Wall putty plays a pivotal role in achieving a flawless wall finish. Everyone deals with putty after living in a new house. Especially when making house repairs, some putties become fluid when scraped onto the wall, while others will hold steady when scraped onto the wall. There are many reasons for these two situations, and adding hydroxypropyl methylcellulose is one of them. Today Kemox will explain the details of the experiment on adding HPMC products to wall putty.
Why HPMC?
Before we dive into the experiments, let's talk about why HPMC is a key ingredient in the construction industry, especially in the putty industry. More than just a filler, HPMC is a performance enhancer that improves consistency, water retention and workability. We can think of it as the secret ingredient for making quality putty.
Preparation
The experiment begins with the preparation of the putty mixture. In the world of construction chemicals, the right proportions are critical to getting the best results. It's like a symphony; the sounds from each instrument need to be in perfect harmony. If you are unsure of the proportions of your additives, contact Kemox.Once the chemicals are in place, they need to be mixed thoroughly. Then water is added according to the specified proportions. This step ensures that the putty reaches the right consistency.
Goto Honglai to know more.
Mixing is the heart of the process
Now we transfer the mixture to a larger bucket, ready for some mechanical manipulation. We use a blender to mix the putty to a smooth, lump-free consistency. If the consistency doesn't feel like it's thick enough, you can mix it a little longer. After sufficient mixing, the putty was ready for the real test.
The test and the results
Take a look at the results of our experiment. We want to observe the texture, consistency and workability of the putty. With the addition of HPMC, these properties are not only enhanced but also changed. It's kind of appetizing to look at the putty we produced. When we scraped the putty onto the wall, it was easy to see that it was very smooth, free of pits and eyes, and easy to handle. The reason for this result is the right mixing ratio on the one hand, and the addition of HPMC on the other.
The proof is in the putty
Adding HPMC to wall putty is not just a step in the process, it's a leap in quality. The details of the experiments we have discussed today highlight the importance of precision, care and correct dosing. So the next time you put your hands on a perfectly smooth wall, remember what science and experimentation have done to achieve a seamless finish.HPMC may be just a few letters on the page of a book, but in the world of wallcoverings putty, it's an important ingredient that deserves the attention it gets.
If you want to learn more, please visit our website HPMC Wall Putty.