Interior wall putty powder, tile adhesives, grouting agents, adhesive cement mortars, high-strength grouting materials, etc. can all use hydroxypropyl methylcellulose (HPMC) with a viscosity of 100,000.
If you are looking for more details, kindly visit our website.
The standard of vitrified microbead insulation mortar is higher, 150,000 viscosity hydroxypropyl cellulose or 200,000 viscosity hydroxypropyl cellulose. If you choose 100,000 viscosity hydroxypropyl cellulose, it will easily cause sagging. .
The most important function of cellulose is to retain water, followed by thickening. In interior wall putty powder, as long as it has good water-retention and low viscosity (70,000-80,000), it is also possible. When the viscosity exceeds 100,000, the viscosity has little effect on water retention. It is not necessary to produce interior wall putty powder. Choose a viscosity of 200,000, because if the viscosity is too high, it will be difficult to scrape and the scraper will sink.
High water solubility allows the concrete to fully solidify and continuously increase the bonding strength. At the same time, it can appropriately increase the tensile strength and cutting strength, thus improving the construction effect and improving work efficiency.
In the putty powder, it plays an important role in locking water, bonding and lubrication, avoiding cracks and dehydration caused by too fast water shortage. It also improves the adhesion of the putty powder, reduces the sagging phenomenon during construction, and the construction is relatively silky. slip.
In the gypsum product series, it plays an important role in water retention, thickening, and lubrication. It also has a certain retarding effect, which solves the problem of drum cracking and insufficient original strength during the construction operation process, and can extend the construction time.
Mainly used as an emulsifier, it can increase the compressive strength and cutting strength, improve the surface coating, and increase the adhesion and bonding strength.
The high water solubility eliminates the need to wet or moisten the floor tiles and base in advance, significantly improving their bonding strength. The slurry can be constructed for a long time, is fine and uniform, is easy to construct, and has good wettability.
The addition of HPMC cellulose gives it excellent bonding strength, low shrinkage and high wear resistance, protecting the base material from mechanical damage and avoiding the impact of penetration on the entire building.
Smooth adhesion ensures high-quality fluidity and cement self-leveling capabilities, and the water locking rate is adjusted to enable rapid condensation and reduce cracking and shrinking.
In the architectural coating manufacturing industry, hydroxypropyl methylcellulose can be used as a film-forming agent, emulsifier, demulsifier and thickener to make the film have better wear resistance, leveling, adhesion and improvement The pH of the interfacial tension is used to determine the interfacial tension, and the miscibility effect with solvents is also good. The high water locking characteristics make it have good brushability and flatness.
The viscosity of 150,000 is close to the viscosity of 100,000 and the viscosity of 200,000. It is suitable for both the viscosity of 100,000 and the viscosity of 200,000.
In the application of building decoration materials, especially inorganic thermal insulation mortar, the most important thing is to focus on bonding to increase the strength, making the cement mortar easier to apply, improving work efficiency, and at the same time having anti-sag effect, which is relatively High water-locking properties can extend the working time of cement mortar, improve shrinkage and cracking resistance, improve surface quality, and enhance adhesion.
Shijiazhuang Aochuang Chemical Technology CO., LTD. is a professional manufacturer of cellulose ether, welcome to contact us.
Ding’ao supply professional and honest service.
Hydroxypropyl methyl Cellulose (HPMC) , is non-ionic cellulose ether, and modified cellulose ether derivatives polymer that is off-white in color and considered safe for human consumption. It is odorless, tasteless, and in the shape of white powder. Hydroxypropyl Methyl Cellulose is made by mature high polymer cellulose as raw material and a series of chemical processing. It is used in various applications in construction, food, pharmaceutical, and personal care industries. It functions as a thickener, binder, film former, water retention agent, suspension aid, and a lubricant depending on the application.
HPMC, Hypromellose is a thickener for aqueous and non-aqueous systems, clear films with grease resistance, binders, lubricants, steric stabilizer and water retention aid. Dissolves in water, undergoes reversible gelation upon heating, non-ionic. According to their molecular weight or degree of substitution, it can form colloidal solution in water, it can not be soluble in solvent, the colloidal solution has the characteristics of high viscosity, adhesion, thickening, emulsifying, shaped, good water retention, protective colloid, film forming, acid resistance, salt tolerance, suspension and other characteristics, and the physiological harm. so it has been widely used in dry mix mortars, it is the most important additive for wall putty, tile adhesive, all kinds of gypsum and cement based dry mix mortars, it is also widely used in pharmaceutical as film forming, released control agent, it can be used for food thickening, emulsification, anti sedimentation.etc. Hydroxypropyl methyl cellulose (HPMC) can dissolve in both cold and hot water, add the appropriate water in a container, heated to 70 degrees Celsius, then keep stirring, adding hydroxypropyl methyl cellulose, it will form a slurry after cooling. This is the main solution of hydroxypropyl methyl cellulose, it is used in many different applications.
In dry mix mortars, the dosage is very low (usually 0.2-0.7%) and it mix with cement/gypsum/sand etc. thoroughly, it can be soluble easily and no need to use hot water to disperse.As the water-retaining agent and retarder of cement mortar, it enables the mortar to have pumping property. In plaster slurry, gypsum materials, putty powder or other building materials, it acts as a binder and helps to improve the spreadability and prolong the operating time.Hydroxypropyl Methylcellulose has high water-holding capacity, can extend the working time of mortar, improve work efficiency and is good for the mortar to produce high mechanical strength during solidification.
In the production of PVC, it can act as a dispersing agent, the main additive in the preparation of PVC by suspension polymerization.In the polymerization process of PVC suspension polymerization system, The use of Hydroxypropyl Methylcellulose as a dispersant can improve suspension dispersion properties, can also improve the particle morphology, and enhance the absorption performance on plasticizers.
HPMC is non-ionic, and in the preparation process can be effectively purified by washing with hot water, it has a very low ash content. Hydroxypropyl Methylcellulose products can fully meet the standards for use of pharma, food, and personal care products.
Hydroxypropyl MethylCellulose is soluble in water, most polar organic solvents, and the appropriate proportion of ethanol/water, propanol /water and dichloroethane, but insoluble in diethyl ether, acetone, and anhydrous alcohol. In cold water, it will swell into a clear or slightly turbid colloidal solution.Its aqueous solution has surface activity, high transparency and stable properties. Hydroxypropyl MethylCellulose has thermal gelation properties, so after heating the aqueous solution will precipitate and form gels, and dissolve again after cooling. Products of different specifications have different gelling temperatures. Its solubility varies with the viscosity, and the lower the viscosity is, the greater the solubility will be. There are some differences in the properties of Hydroxypropyl MethylCellulose of different specifications. The dissolution of Hydroxypropyl MethylCellulose in water is not affected by the pH value.
1. Water retention Property: In wall putty/Skimcoat, the main roles of cellulose ether are water retention, adhesion, lubrication and so on. Hydroxypropyl MethylCellulose has high water-holding performance, surface opticity and improves uniformity. This helps to avoid crusting and off-powder phenomena, improve resistance to shrinkage, cracking and vertical flow, and to improve the work efficiency since the painting job is comfortable and saves effort.
2. Bio-Stability Property: Hydroxypropyl MethylCellulose has many features such as thickening power, salt discharge performance, pH stability, water retention, excellent film-forming properties, extensive resistance to enzymes, dispersion and adhesion.In water based paints and coatings, Hydroxypropyl MethylCellulose acts as film-forming agents, thickeners, emulsifiers and stabilizers, making the coating film with good wear resistance, leveling property, and adhesion, and improving the surface tension, pH stability, and compatibility with metal color materials. In the water-based paints, Hydroxypropyl MethylCellulose has excellent storage stability, maintains uniform viscosity, makes pigments uniformly dispersed, and basically won&#;t be affected by the pH value.
3. Disperse Property: In the production of synthetic resin, Hydroxypropyl MethylCellulose plays the role of protective colloidal agents and can effectively prevent polymeric particles from agglomerating. In the floating polymerization of vinyl chloride (VC), the disperse system has a direct impact on the product, PVC resin, and the quality of processing and products. It helps to improve the thermal stability of the resin and control the particle size distribution(that is, adjust the density of PVC). PVC resins made from high-quality cellulose ethers not only can ensure that the performance meets international standards, but also have apparent physical properties, fine particle characteristics and excellent melting rheological behavior.
4. Thickening Property: Hydroxypropyl MethylCellulose mainly functions as the thickening agent and can increase the the tensile strength and flexural strength. It also helps to improve surface coatings, enhance adhesion and improve the bonding strength of mortar. Furthermore, good permeability can improve the uniformity of the interface, enhance lubricity and fluidity of mortar, make coating easier and thus improve work efficiency.
5. Construct Property: In the bonding of tiles, tile adhesives can function as water-retaining agent and adhesives, and can greatly improve construction performance of adhesives, allow longer opening hours and greater cohesion, and prevent falling of tiles due to excessive water loss. Hydroxypropyl MethylCellulose has the properties of improving the workability, good water-retaining property, enhancing adhesion and high resistance to hanging. Hydroxypropyl MethylCellulose can improve the sticking and tiling efficiency, and also enhance bonding strength and shear strength.
The company is the world’s best HPMC for tile adhesives supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.